Register



Pages: [1]

Fitting an Oil Pressure Sender

· 6 · 1375
« previous next »

0 Members and 1 Guest are viewing this topic.

*

Malc

  • *****
  • Posts: 181
Fitting an Oil Pressure Sender
« on: December 16, 2012, 08:53:23 PM »
I'm looking to fit an oil pressure gauge to my 3.5 V8. Do I have to put in a T-piece to use the port the pressure switch is in at the moment or can I use one of the other ports on the filter housing?
There isn't much clearance between the filter housing and the steering box, so I'm hoping one of the other ports also tap into the outlet side from the filter. Here is a piccie:



Is the port nearest the flange of the housing (the one that comes out at an angle) a tap into the outlet from the filter?
Logged
Disco 300tdi
Defender 90 V8
*

Malc

  • *****
  • Posts: 181
Re: Fitting an Oil Pressure Sender
« Reply #1 on: December 22, 2012, 10:59:45 AM »
Can I fit the oil pressure gauge to this port?

Logged
Disco 300tdi
Defender 90 V8
*

Malc

  • *****
  • Posts: 181
Re: Fitting an Oil Pressure Sender
« Reply #2 on: December 30, 2012, 04:41:35 PM »
Someone out there must've fitted an oil pressure gauge?? :'(
Logged
Disco 300tdi
Defender 90 V8
*

Sooty

  • *****
  • Posts: 278
  • been there winched that
  • Name: mike robertson
Re: Fitting an Oil Pressure Sender
« Reply #3 on: December 30, 2012, 06:01:09 PM »
Pm piper5

he can help you  ;D
Logged
Started out with nothing,
Still have most of it left
*

piper5

  • *******
  • Posts: 874
Re: Fitting an Oil Pressure Sender
« Reply #4 on: December 30, 2012, 09:59:57 PM »
na thats petrol engine ;)
Logged
*

Malc

  • *****
  • Posts: 181
Re: Fitting an Oil Pressure Sender
« Reply #5 on: December 31, 2012, 05:06:48 PM »
Yeh its on a 3.5 v8 but thanks anyway guys. Anyone fitted an oil gauge to a v8?
Logged
Disco 300tdi
Defender 90 V8
Pages: [1]
« previous next »