WANTED - freelander front prop shaft

· 6 · 1395

0 Members and 1 Guest are viewing this topic.

*

gary1968

  • ***
  • Posts: 125
WANTED - freelander front prop shaft
« on: February 05, 2011, 05:38:39 PM »
As the title, while changing the VCU on my propshaft today I (we) broke the universal joint yoke on the front prop shaft section..... f*** that thing is tight on the vcu spline.
So, I am in need of a front propshaft section, or indeed just the universal joint yoke, for a 1.8l, year 2000 freelender.

Gaz

*

python

  • *******
  • Posts: 2679
  • its not a landrover if it doesn't leak oil.
Re: WANTED - freelander front prop shaft
« Reply #1 on: February 05, 2011, 05:41:19 PM »
try dalcrue 4x4 breakers in creif.
my name, JON
disco 200 tdi,
disco 300 tdi
110 v8
3 x freelanders td4
1965 series 2a 109 crewcab.
series 3 on galvy chassis
disco 200 tdi,
disco 3.9 v8 lpg
disco 3,9. no lpg????

amature radio callsign MM6MIS

*

gary1968

  • ***
  • Posts: 125
Re: WANTED - freelander front prop shaft
« Reply #2 on: February 05, 2011, 05:43:13 PM »
Dont supose you have a phone number Jon?

Gaz

*

python

  • *******
  • Posts: 2679
  • its not a landrover if it doesn't leak oil.
Re: WANTED - freelander front prop shaft
« Reply #3 on: February 05, 2011, 05:45:31 PM »
my name, JON
disco 200 tdi,
disco 300 tdi
110 v8
3 x freelanders td4
1965 series 2a 109 crewcab.
series 3 on galvy chassis
disco 200 tdi,
disco 3.9 v8 lpg
disco 3,9. no lpg????

amature radio callsign MM6MIS

*

gary1968

  • ***
  • Posts: 125
Re: WANTED - freelander front prop shaft
« Reply #4 on: February 05, 2011, 05:49:29 PM »
I have just had a brain storm, lol. I am now thinking that if the splines (universal joints) are the same on the front and rear section then I will buy a rear section and use the yoke from that....... with new bearings. I will be investigating the old vcu and propshafts in the morning......
Fingers crossed as I can get a rear section dirt cheap on the bay.....

Gaz

*

python

  • *******
  • Posts: 2679
  • its not a landrover if it doesn't leak oil.
Re: WANTED - freelander front prop shaft
« Reply #5 on: February 05, 2011, 05:51:00 PM »
good luck. hope it works out.
my name, JON
disco 200 tdi,
disco 300 tdi
110 v8
3 x freelanders td4
1965 series 2a 109 crewcab.
series 3 on galvy chassis
disco 200 tdi,
disco 3.9 v8 lpg
disco 3,9. no lpg????

amature radio callsign MM6MIS