Register



Pages: [1]

Program a new key fob

· 11 · 5070
« previous next »

0 Members and 1 Guest are viewing this topic.

*

coolcamper55

  • *******
  • Posts: 959
Program a new key fob
« on: January 12, 2011, 06:55:52 PM »
Has any of you bright folks managed to do this. Its a Lucas 17TN fob and I am not too sure if I need to use a Nanocom to do this. Searching around the web has left me confused as to what really works.

Grateful for any assistance.

T
Logged
*

pitcaig

  • *****
  • Posts: 222
  • SLROC Member no.2152
Re: Program a new key fob
« Reply #1 on: January 12, 2011, 07:07:59 PM »
Tommy
What car is it for? I've used my Nanocom to program keys for a Disco 2, but have not tried programing one for a defender.

Cheers
Graeme
Logged
*

mac

  • *****
  • Posts: 171
Re: Program a new key fob
« Reply #2 on: January 12, 2011, 07:31:30 PM »
300 series Disco I or TD5 / 50th Defender methinks - and they can only be programmed with Nanocom/Testbook/Hawkeye/Autologic etc.

Lucas 17TN fob
Logged
*

coolcamper55

  • *******
  • Posts: 959
Re: Program a new key fob
« Reply #3 on: January 12, 2011, 07:45:38 PM »
Its as Mac has posted in the picture its for my Defender TDCi 07.

Seen all sorts of stuff about pushing it four times and all other things but what is the answer?

T
Logged
*

pitcaig

  • *****
  • Posts: 222
  • SLROC Member no.2152
Re: Program a new key fob
« Reply #4 on: January 12, 2011, 08:04:48 PM »
I know the Nanocom will program it for a pre 07 Defender but not sure about your one. I will look into this further.
Graeme
Logged
*

python

  • *******
  • Posts: 2679
  • its not a landrover if it doesn't leak oil.
Re: Program a new key fob
« Reply #5 on: January 12, 2011, 08:06:44 PM »
Sorry to hijack this but would nanocom work on a 94/95 300 series disco? I have the same fob
and problem. Thanks. 
Logged
my name, JON
disco 200 tdi,
disco 300 tdi
110 v8
3 x freelanders td4
1965 series 2a 109 crewcab.
series 3 on galvy chassis
disco 200 tdi,
disco 3.9 v8 lpg
disco 3,9. no lpg????

amature radio callsign MM6MIS
*

pitcaig

  • *****
  • Posts: 222
  • SLROC Member no.2152
Re: Program a new key fob
« Reply #6 on: January 12, 2011, 08:13:49 PM »
Hi It's not listed as being able to program them on a D1.
Logged
*

python

  • *******
  • Posts: 2679
  • its not a landrover if it doesn't leak oil.
Re: Program a new key fob
« Reply #7 on: January 12, 2011, 08:15:07 PM »
Oh well. Cheers for the quick reply.  ;D
Logged
my name, JON
disco 200 tdi,
disco 300 tdi
110 v8
3 x freelanders td4
1965 series 2a 109 crewcab.
series 3 on galvy chassis
disco 200 tdi,
disco 3.9 v8 lpg
disco 3,9. no lpg????

amature radio callsign MM6MIS
*

coolcamper55

  • *******
  • Posts: 959
Re: Program a new key fob
« Reply #8 on: January 12, 2011, 08:17:50 PM »
Quote from: pitcaig on January 12, 2011, 08:04:48 PM
I know the Nanocom will program it for a pre 07 Defender but not sure about your one. I will look into this further.
Graeme

What a gent,
........................the bits are probably the same as with the TD5 but the ECU would be different me thinks

Thanks,

T
Logged
*

pitcaig

  • *****
  • Posts: 222
  • SLROC Member no.2152
Re: Program a new key fob
« Reply #9 on: January 12, 2011, 09:12:44 PM »
Hi
After a little digging about I have found that it is the same unit that is fitted in the earlier Defender and the 07 on Defender.
But what I can't find out is if it is connected to the OBD port in the same way. The engine ECU and Instrument cluster on the 07 Defender uses a high speed can bus connection.
So in theory the Nanocom should be able to program the unit but it depends on wether the interface between the OBD port and the alarm unit has remained the same.

Here's a link which gives details of all the Land Rover ECU's, what they do and what they can be made to do. ;)


http://www.blackbox-solutions.com/shop/help/

Cheers
Graeme
Logged
*

coolcamper55

  • *******
  • Posts: 959
Re: Program a new key fob
« Reply #10 on: January 12, 2011, 09:58:33 PM »
From what I can see the alarm unit is the Lucas 10AS same as in the TD5 me thinks. The unit has a learn function that allows the new fobs to be attached to the system.

T
Logged
Pages: [1]
« previous next »