Register



Pages: [1]

Transfer Box

· 7 · 2699
« previous next »

0 Members and 1 Guest are viewing this topic.

*

sthrifty

  • *******
  • Posts: 2066
Transfer Box
« on: May 25, 2010, 08:11:57 PM »
On the weekend away at the end of our wee off road run I thought I would do the last 100m in low box,alas no low box the transfer lever is just not engaging feels very free.Was fine last time I used it.

Any advice welcome
Logged
1995 300 tdi csw 110
series 3 109 2.25p
ex mil 1986 90 s/t 2.5na
88on galv chassis needs rebuild and more
Disco m reg 2l mpi
[/
*

jumbo

  • *****
  • Posts: 2321
  • drive through car wash landrover style
    • photo bucket
Re: Transfer Box
« Reply #1 on: May 25, 2010, 08:21:58 PM »
im not giving any advice on gearboxes with my tempermental reverse gear giving me tennis elbow >:( >:(
Logged
doug
2005 3door freelander td4
1986 90s/w with 200tdi


warning::: any jokes posted by myself come with a health warning!!!!!
*

rangerovering

  • *******
  • Posts: 1272
Re: Transfer Box
« Reply #2 on: May 25, 2010, 11:11:00 PM »
Suggest you remove the floor and check that the levers are still attached to the transfer box! Sounds like one of the clevis pins have gone AWOL, or more anoyingly the splines have stripped.....

Good luck!
Logged
Steve



*

MudBucket

  • *****
  • Posts: 266
Re: Transfer Box
« Reply #3 on: May 26, 2010, 08:34:19 AM »
does it go back into high range ok?

might be that the lever is not moving far enough to engage into low.

Logged
*

james

  • ****
  • Posts: 163
    • www.discoveryownersclub.org
Re: Transfer Box
« Reply #4 on: May 26, 2010, 07:14:47 PM »
from the feel of it john ist on of the pins that has came out not uncommon
i can have a look next wednessday
Logged
slightly modified 200 tdi


*

sthrifty

  • *******
  • Posts: 2066
Re: Transfer Box
« Reply #5 on: June 09, 2010, 01:01:37 PM »
James had a look today and yes the lever has come away from the transfer box,what parts do I need to get this sorted?

Is it just the clevis pin and circlip or will i need a new lock nut.

Its a 110 300tdi 1995.

If anyone can help with whats needed and part numbers be appreciated
Logged
1995 300 tdi csw 110
series 3 109 2.25p
ex mil 1986 90 s/t 2.5na
88on galv chassis needs rebuild and more
Disco m reg 2l mpi
[/
*

mac

  • *****
  • Posts: 171
Re: Transfer Box
« Reply #6 on: June 09, 2010, 07:27:06 PM »
Quote from: sthrifty on June 09, 2010, 01:01:37 PM
If anyone can help with whats needed and part numbers be appreciated

Download and install a copy of Microcat that way you can check out part numbers / exploded diagrams etc.  Do a Google for 'Green Oval Downloads'
Logged
Pages: [1]
« previous next »