I have a Disco 2 that's throwing up a strange issue.
When I got it - the 3 amigo's were on but it was braking absolutely fine. Nanocom was showing that it had 3 failed ABS sensors so I replaced them all. The abs, traction control and hill descent lights all went off.
But when driven the traction control comes on the minute it starts to roll but only the TC light is coming on. Using another scanner on the abs system shows that there's no faults recorded in the abs ecu and the light is still off.
Get it rolling at all and the traction control light comes on and the brakes are applied until I lift my foot off the throttle. carry on a bit and the TC cuts in but still no abs light coming on.
If I pull the fuse for th abs - all three lights come on but the car drives perfectly. The only other thing I notices was that at one time the speed stopped working but the next time I drove it, it started working again.
I wondered if it was picking up a faulty signal off the instrument cluster.
Any ideas would be helpful, or any ideas on how to disable the TC would be helpful
Anyone had anything similar
Duncan
The
