Register



Pages: [1]

disco 2 project or spares

· 9 · 2028
« previous next »

0 Members and 2 Guests are viewing this topic.

*

fireblade

  • *****
  • Posts: 351
  • Name: mike walker
disco 2 project or spares
« on: March 02, 2016, 08:47:19 PM »
disco 2 for project or spares will break if enogh interest
£1,000 – Edinburgh, United Kingdom
disco 2 es starts runs drives good mot june 133000 miles
been welded for last mot so thats done on springs saggy headlinning
got a burst water pipe at oil filter been temp fix still leaking
so will sell as is or break good cheap project body work all good
no battery as guffed but can start drive to show all works ok
07831180964
« Last Edit: March 26, 2016, 11:36:22 AM by fireblade »
Logged
mike
edinburgh
*

fireblade

  • *****
  • Posts: 351
  • Name: mike walker
Re: disco 2 project or spares
« Reply #1 on: March 12, 2016, 12:33:11 PM »
still available
Logged
mike
edinburgh
*

fireblade

  • *****
  • Posts: 351
  • Name: mike walker
Re: disco 2 project or spares
« Reply #2 on: March 26, 2016, 11:34:49 AM »
bump
Logged
mike
edinburgh
*

python

  • *******
  • Posts: 2679
  • its not a landrover if it doesn't leak oil.
Re: disco 2 project or spares
« Reply #3 on: March 26, 2016, 12:43:45 PM »
Would you sell the fuel pump and maf? £?! :-)
Logged
my name, JON
disco 200 tdi,
disco 300 tdi
110 v8
3 x freelanders td4
1965 series 2a 109 crewcab.
series 3 on galvy chassis
disco 200 tdi,
disco 3.9 v8 lpg
disco 3,9. no lpg????

amature radio callsign MM6MIS
*

fireblade

  • *****
  • Posts: 351
  • Name: mike walker
Re: disco 2 project or spares
« Reply #4 on: March 26, 2016, 02:26:54 PM »
in should have a fuel pump the one at back of engine on the left?
Logged
mike
edinburgh
*

oilcan

  • ***
  • Posts: 81
  • Name: Raymond Boyd
Re: disco 2 project or spares
« Reply #5 on: March 26, 2016, 07:31:53 PM »
The fuel pump is in the tank accessed under the boot carpet
Logged
*

fireblade

  • *****
  • Posts: 351
  • Name: mike walker
Re: disco 2 project or spares
« Reply #6 on: March 27, 2016, 10:04:40 AM »
sorry thought you were talking about the high pressure pump
anyway i have a pump for you
mike
Logged
mike
edinburgh
*

webby

  • ***
  • Posts: 130
Re: disco 2 project or spares
« Reply #7 on: April 16, 2016, 02:19:16 PM »
Is your disco still available buddy? :)
Logged
could you pass the spanner....... the other one, oh the hammer too....... ok the grinder please......
*

fireblade

  • *****
  • Posts: 351
  • Name: mike walker
Re: disco 2 project or spares
« Reply #8 on: April 16, 2016, 10:42:32 PM »
still here webby
Logged
mike
edinburgh
Pages: [1]
« previous next »