Register



Pages: [1]

SIII SWB Tub Floor Supports

· 6 · 1587
« previous next »

0 Members and 2 Guests are viewing this topic.

*

CBRCBR

  • *****
  • Posts: 92
SIII SWB Tub Floor Supports
« on: October 22, 2012, 09:43:39 PM »
Hopefully someone can help with the following:

Do the 3 steel floor supports either: a)fix to the chassis upstand platforms and fix to the tub floor perimeter flange or; b) only fix to the tub floor perimeter flange  and float above the chassis upstands?  I have to replace mine as they are all shot and badly corroded.  It looks as though they just float, but it would be stronger if they were fixed.

Cheers, Clive.
Logged
*

Jack

  • *****
  • Posts: 47
  • Name: Jack Griffiths
Re: SIII SWB Tub Floor Supports
« Reply #1 on: October 22, 2012, 10:05:12 PM »
As far as I can remember from when I had my tub off, they are only fixed to the tub and then the rubber pads on them sit on the chassis up stands.
« Last Edit: October 22, 2012, 10:15:45 PM by Jack »
Logged
1981 SIII 109 'Stage One' V8
1973 Range Rover project.
*

ruaritreble

  • *****
  • Posts: 614
    • ruariboy
Re: SIII SWB Tub Floor Supports
« Reply #2 on: October 23, 2012, 01:09:21 PM »
Quote from: Jack on October 22, 2012, 10:05:12 PM
As far as I can remember from when I had my tub off, they are only fixed to the tub and then the rubber pads on them sit on the chassis up stands.

I agree with the above. You can get replacment galvanised struts from YRM.
http://www.yrmlandrover.com/epages/BT3575.sf/en_GB/?ObjectPath=/Shops/BT3575/Products/061/SubProducts/%22Rivet%20Option-0001%22
Logged
Karis 110 - The perfect way to get a MTB to the top of the hill.
Power to the pedal!

Myrtle Air Portable - V8
------------------------
MM6IIO
------------------------
http://www.youtube.com/user/ruariboy

http://s826.photobucket.com/home/ruariboy
*

Jack

  • *****
  • Posts: 47
  • Name: Jack Griffiths
Re: SIII SWB Tub Floor Supports
« Reply #3 on: October 26, 2012, 04:41:09 PM »
Rubber pads are part no. 332582

Picture linked to below might be of use to you if you needing anything else for it.

http://i36.photobucket.com/albums/e39/welshy89/88bodyparts.jpg
Logged
1981 SIII 109 'Stage One' V8
1973 Range Rover project.
*

Dogmatix

  • ***
  • Posts: 146
  • Name: Dave
Re: SIII SWB Tub Floor Supports
« Reply #4 on: October 27, 2012, 01:52:47 PM »
Definitely fixed to the tub only. Doing my tub just now.
Logged
Man has achieved great things armed with a large hammer and a good working knowledge in profanity..........
*

CBRCBR

  • *****
  • Posts: 92
Re: SIII SWB Tub Floor Supports
« Reply #5 on: November 01, 2012, 10:06:06 PM »
Thanks for your help guys.
Logged
Pages: [1]
« previous next »