Register



Pages: [1]

Axle breather removal

· 7 · 1609
« previous next »

0 Members and 1 Guest are viewing this topic.

*

ruaritreble

  • *****
  • Posts: 614
    • ruariboy
Axle breather removal
« on: April 30, 2012, 09:50:26 AM »
My front axle breatherpipe  has snapped off flush my 110. All that's left is a plasic flange. How does this fit into the the axle, can i just use an easy out to unscrew it or is it not threaded?
Logged
Karis 110 - The perfect way to get a MTB to the top of the hill.
Power to the pedal!

Myrtle Air Portable - V8
------------------------
MM6IIO
------------------------
http://www.youtube.com/user/ruariboy

http://s826.photobucket.com/home/ruariboy
*

Buffalo Bill

  • *****
  • Posts: 1491
  • Name: Bill Conner
Re: Axle breather removal
« Reply #1 on: April 30, 2012, 11:21:42 AM »
the ones on mine just screwed out. but thats on a 89 model.

Cheers Bill
Logged
1989 110
1990 90
1988 90
1972 V8 WOOP WOOP
*

Dave T

  • *****
  • Posts: 1136
Re: Axle breather removal
« Reply #2 on: April 30, 2012, 12:37:04 PM »
yup screwed in, i have an easy out the right size if you need,  ;)
Logged
1994 Defender 90
2016 D4 Graphite
*

ruaritreble

  • *****
  • Posts: 614
    • ruariboy
Re: Axle breather removal
« Reply #3 on: April 30, 2012, 01:30:22 PM »
Ok, I thought so seeing as all te kits are 1/4"bsp. But just wanted to check seeing as there are no nuts on either axle. I got easyout's.
Logged
Karis 110 - The perfect way to get a MTB to the top of the hill.
Power to the pedal!

Myrtle Air Portable - V8
------------------------
MM6IIO
------------------------
http://www.youtube.com/user/ruariboy

http://s826.photobucket.com/home/ruariboy
*

Dave T

  • *****
  • Posts: 1136
Re: Axle breather removal
« Reply #4 on: April 30, 2012, 05:12:38 PM »
So did I when I sheared mine off  :) :)
Logged
1994 Defender 90
2016 D4 Graphite
*

ruaritreble

  • *****
  • Posts: 614
    • ruariboy
Re: Axle breather removal
« Reply #5 on: May 02, 2012, 11:00:07 AM »
Before I take the easy out to the breather - The td5 has a pushfit fitting.

(Not my axle)
 
How do you remove the pipe from the fitting?
Logged
Karis 110 - The perfect way to get a MTB to the top of the hill.
Power to the pedal!

Myrtle Air Portable - V8
------------------------
MM6IIO
------------------------
http://www.youtube.com/user/ruariboy

http://s826.photobucket.com/home/ruariboy
*

diesel jock

  • ****
  • Posts: 180
Re: Axle breather removal
« Reply #6 on: May 02, 2012, 07:19:50 PM »
hi ruari
Push the pipe downwards then push the collar (red in the pic) down at the same time,whilst holding collar down pull pipe upwards i use the open end of a spanner to hold the collar down.
Cheers
Stewart
Logged
Pages: [1]
« previous next »