Land rover 90 refurb on galv chassis, arb airlockers etc

· 1 · 858

0 Members and 1 Guest are viewing this topic.

*

dave

  • ****
  • Posts: 193
Land rover 90 refurb on galv chassis, arb airlockers etc
« on: August 07, 2011, 07:21:50 PM »
I have for sale my 1992 90 200tdi, a very straight, clean 90 with many new parts inc chassis. Spec as follows
Refurbished summer 2010 onto new galv chassis inc msa/arc roll cage mounts(no rollcage fitted)
New exmoor trim hoostick set and full sand canvas
Internal rollbar inc seatbelt mounts
Refurbished TD5 axles with 24 spline arb airlockers front and rear, strengthened shafts to rear and H/D drive members all round.
Diff guards f and r
H/D steering bars
Steering guard
New 130 H/D clutch kit
Very healthy 200 tdi, hybrid turbo, new head gasket, timing belt and water pump.
New adwest steering box.
Front mounted Warn 8274 winch with gigglepin upgrades, XP motor, albright solenoid, plasma rope mounted in galv gwyn lewis bumper.
3" lift with +5" terrafirma shocks, QT 6deg front arms and cranked rear.
New GKN/Gwyn Lewis wide angle prop shafts f and r.
5x 35"x12.50"x15 Mickey Thompson baja mtz on black modulars.
New safari snorkel correctly plumbed in.
100amp alternator.
2x 950amp batteries under pass seat.
Custom side exit exhaust.
30mm wheel spacers.
New series 3 doors.
New windscreen etc.
Very tight lt77 gearbox, no issues.
New 1.4:1 transfer box.
Run and regularly serviced by land rover specialist.

Many many new parts used in build. A land rover that will last. Perfect bulkhead. Fresh MOT.
Contact 07517666989.