Hello Folks
Wonder if anyone can give me some advice please?
I'm Currently rebuilding a 1982 Series 3 2.25 diesel landie from the bottom up.
Reached the momentous stage - after about 1 year - of testing the electrics - All good, then introduced diesel into the engine this afternoon. Diesel right up to filter and into distribution pump- so far so good! Bled low pressure side - plenty diesel, then tried bleeding high pressure side (via screw on square control unit on pump) no diesel. Cracked open pipes at injectors and a little diesel visible - not a dribble - just wet.
Have turned the engine over but no engine start.
Of course, the pump might not be aligned properly, but first things first - I'm puzzled at the lack of diesel at the high pressure side of the pump and at the injectors.
Any advice/help would be very gratefully received!
Cheers
Jim