SLROC Forum

General Category => TECHNICAL CHAT => Topic started by: banzia on September 26, 2017, 07:15:54 PM

Title: Defender Ignition Switch Wiring...Help!! 1995 300 tdi
Post by: banzia on September 26, 2017, 07:15:54 PM

Hi All
Decided to change my worn out ignition barrel for a brand new one...

Problem is that the old one doesnt exactly match the new on...

The old one seems to be similar to a series type with the large terminals. and it has 5 of these...

The New one which I got from paddocks has 4 terminals with terminalr 2 being a double configuration...

I will have to change the spade connectors to the smaller size but can someone tell me the configuration of the wiring that should be on this newer switch

regards
james

Title: Re: Defender Ignition Switch Wiring...Help!! 1995 300 tdi
Post by: Lurch032003 on September 27, 2017, 12:09:55 AM

Not sure if this link helps
http://www.retroanaconda.com/landrover/manuals/series3wm/7_electrical_5mb_engine_supplement.pdf

Or fir defender

http://www.retroanaconda.com/landrover/manuals/defender_wsm_1993ed.pdf

Hope this helps
John

Title: Re: Defender Ignition Switch Wiring...Help!! 1995 300 tdi
Post by: banzia on September 27, 2017, 01:49:55 PM

Thanks john
I will take a look at it tonight
j