SLROC Forum

General Category => TECHNICAL CHAT => Topic started by: sardass on October 02, 2010, 10:10:52 PM

Title: Disco 1 rear wheel arch
Post by: sardass on October 02, 2010, 10:10:52 PM

Hi need to do some welding in the rear wheel arch, just at the top when you open the back door, i don't want to have to replace the whole arch as there is nothing wrong with the rest of it just the top couple of inches, i have been told you can buy a patch to fit into this area, has any one every bought one and where from

Title: Re: Disco 1 rear wheel arch
Post by: discoverypete on October 03, 2010, 09:41:58 AM

Duncan is scraping a Disco in For sale or Wanted. Why don't you take your angle grinder to that?

           Pete.

Title: Re: Disco 1 rear wheel arch
Post by: DRH on October 03, 2010, 10:14:12 AM

The drivers side arch is totally gone, I'll check the passenger side but I don't hold out much hope

Duncan

Title: Re: Disco 1 rear wheel arch
Post by: python on October 03, 2010, 10:20:22 AM

Try yrm metal solutions. They might do the bit you need.

Title: Re: Disco 1 rear wheel arch
Post by: discoverypete on October 03, 2010, 11:38:51 AM

John Paddocks do a panel for ?25.
http://www.paddockspares.com/pp/DISCOVERY_1/Body_and_Panels/Wheel_Arch_Repair_Section_RH.html

                 Pete.