D2 and Project clearance UPDATED

· 9 · 2090

0 Members and 1 Guest are viewing this topic.

*

bob

  • *
  • Posts: 105
D2 and Project clearance UPDATED
« on: April 01, 2016, 11:34:50 AM »
Due to an unexpected injury, I've decided that some of the "Round to it" vehicles have to go. :-[ :'(

2 off '51 Plate D2 Commercials  (both dark green)

1    Known history, HD rear suspension, full load guard, Chip'd ECU, Reasonable body & interior, high mileage
      but large chassis sections "missing" due to rust

      UPDATE Got a battery on this one today, started and drives fine with 202,000 miles on the clock

      £800

2   Unknown history, engine runs but engine bay partially dismantled to replace steering box pipes (all removed parts are there!), electric
     leather front seats, half load guard, aftermarket tubular front bumper.
     Bodywork straight but interior grubby Reasonable-good chassis

     £500

Both are on SORN, neither come with batteries, I have the V5's in my name

Spring / Summer Project

Fiberglass Eagle kit car (similar to Jago or Jeep Wrangler)

V5 states "4x4, diesel, made from new / recycled parts" 8) 8)

This has no engine/ gearbox BUT comes complete with a 200tdi Disco rolling chassis with engine, gearbox, axles etc which will require some "adjustment" to fit.

£500 ovbo



Bob
« Last Edit: April 17, 2016, 09:53:35 AM by bob »

*

rodspink

  • ****
  • Posts: 175
Re: D2 and Project clearance
« Reply #1 on: April 01, 2016, 06:15:31 PM »
Hi .

How many miles would be on the Disco engine.
What chassis is the kit car built on.
Where you located
cheers.
Rod

*

bob

  • *
  • Posts: 105
Re: D2 and Project clearance
« Reply #2 on: April 02, 2016, 06:07:59 PM »
Hi .

How many miles would be on the Disco engine.
What chassis is the kit car built on.
Where you located
cheers.
Rod

Hi Rod,

Unfortunately I can't get a battery on either due to my hand so I've no idea

Kit car is on its own chassis  at present but my plan was to "edit" a disco chassis to fit

I'm right beside the west end of Edinburgh airport runway.

Bob


*

rodspink

  • ****
  • Posts: 175
Re: D2 and Project clearance
« Reply #3 on: April 03, 2016, 10:19:02 AM »
Hi Bob

Cheers for the info.
Will be in touch if interested.  Pretty far away unfortunately.

Cheers.
Rod

*

katowagon

  • *****
  • Posts: 15
  • Name: Clark Gourlay
Re: D2 and Project clearance
« Reply #4 on: April 03, 2016, 09:21:14 PM »
Bob
how much work required for the eagle to get it on the road. thinking for the daughter for RTV, I can stop in and have a look if your about

Clark yellow v8 90.


*

bob

  • *
  • Posts: 105
Re: D2 and Project clearance
« Reply #5 on: April 04, 2016, 07:16:14 AM »
Bob
how much work required for the eagle to get it on the road. thinking for the daughter for RTV, I can stop in and have a look if your about

Clark yellow v8 90.

Morning Clark,

Best to come and have a look.
PM sent with phone no.

Bob

*

bob

  • *
  • Posts: 105
Re: D2 and Project clearance UPDATED
« Reply #6 on: April 16, 2016, 08:43:52 PM »
Bump

*

Mike

  • ****
  • Posts: 150
Re: D2 and Project clearance UPDATED
« Reply #7 on: April 16, 2016, 10:05:37 PM »
Bob, where are you located?

*

bob

  • *
  • Posts: 105
Re: D2 and Project clearance UPDATED
« Reply #8 on: April 17, 2016, 09:50:32 AM »
Bob, where are you located?

I'm right beside the west end of Edinburgh airport runway.

Bob