Fitted a new wing skin and inner wing and straightened the headlamp panel after a truck walloped it a few weeks ago.
I got an unwelcome surprise though when the wing was off to find part of the A post totally gone, had I known I would have bought a new section, however the rot was confined to the inside edge and time was against me for getting one posted up during the holidays so I cut the rot out, fabricated a piece and welded it in.
Its now all ground down, seam sealed and schutzed, so not as straight forward a job as I had hoped and despite several soakings of WD40 just about every bold either sheared or had to be cut off as its the first time in 26 years they have been off
PS Sorry for the photobucket pics the site only allows tiny sized image files which is impractical if not using a pc