SLROC Forum

General Category => TECHNICAL CHAT => Topic started by: stage recovery on September 03, 2014, 08:18:18 PM

Title: Sankey Trailer shock absorbers
Post by: stage recovery on September 03, 2014, 08:18:18 PM

Can anybody tell me if the rear shock absorbers from a series 88" are the same as fitted to Sankey trailers? Full extended length on the Sankey is 440mm pin to pin.

Title: Re: Sankey Trailer shock absorbers
Post by: sj72blair on September 03, 2014, 11:57:00 PM

On a Sankey wide track they're the same as a 109" series rears, not sure about a narrow track Sankey.

Title: Re: Sankey Trailer shock absorbers
Post by: stage recovery on September 04, 2014, 12:58:33 AM

Thanks Steve,  already see that Series 109" rears have an eye at the top and a pin at the bottom, my Sankey shocks need an eye top and bottom.

Title: Re: Sankey Trailer shock absorbers
Post by: lreay on September 04, 2014, 11:47:14 AM

Hi Colin,

The Dingocroft website gives sizes http://www.dingocroft.co.uk/acatalog/SuspensionParts-Series2and3-p3.html (http://www.dingocroft.co.uk/acatalog/SuspensionParts-Series2and3-p3.html). Looks like it might need to be the front shock from a series?

Cheers
Luke

Title: Re: Sankey Trailer shock absorbers
Post by: stage recovery on September 04, 2014, 06:35:17 PM

Thanks Luke, front shocks would be just the job.

Title: Re: Sankey Trailer shock absorbers
Post by: stage recovery on September 10, 2014, 12:05:35 AM

Pair of Series 3 88" front shockers now fitted to Sankey trailer.