Register



Pages: [1]

rear transfer box seal

· 4 · 686
« previous next »

0 Members and 1 Guest are viewing this topic.

*

piper5

  • *******
  • Posts: 874
rear transfer box seal
« on: November 26, 2013, 10:21:55 PM »
hi guys does anyone have a diagram of how the rear oil seal , metal dust shield and drive flange should be in the back of a transfer box please.
mine has been butchered in the past and is leaking quite badly into the handbrake.
any tips on sealing it up would be handy too.
breathers are clear

thanks
Logged
*

mikes lr

  • ***
  • Posts: 83
  • Name: michael sherwood
Re: rear transfer box seal
« Reply #1 on: November 26, 2013, 10:41:29 PM »
Quote from: piper5 on November 26, 2013, 10:21:55 PM
hi guys does anyone have a diagram of how the rear oil seal , metal dust shield and drive flange should be in the back of a transfer box please.
mine has been butchered in the past and is leaking quite badly into the handbrake.
any tips on sealing it up would be handy too.
breathers are clear

thanks
new flange kit knock the seal right back into its position and keep it clean remove oil if fitting in situe
Logged
*

lreay

  • *****
  • Posts: 202
Re: rear transfer box seal
« Reply #2 on: November 26, 2013, 11:27:42 PM »
This guide should help http://forums.lr4x4.com/index.php?showtopic=29370.

Cheers
Luke
Logged
*

piper5

  • *******
  • Posts: 874
Re: rear transfer box seal
« Reply #3 on: November 27, 2013, 10:47:44 PM »
all sorted now , found a previous owner of the transfer box had put the metal dust shield behind the seal against the bearing.
 oh and it was only short of a litre :o
Logged
Pages: [1]
« previous next »