rivnut tool.

python

Posts: 2679
its not a landrover if it doesn't leak oil.

rivnut tool.

« on: January 06, 2011, 08:08:05 PM »

as above, anyone got one i could use or come along and you use it for me. need four holes drilled and set with rivnuts for my doggaurd. the closer to dundee the better. any further and i might be as cheap to buy one. thanks.

Logged

my name, JON
disco 200 tdi,
disco 300 tdi
110 v8
3 x freelanders td4
1965 series 2a 109 crewcab.
series 3 on galvy chassis
disco 200 tdi,
disco 3.9 v8 lpg
disco 3,9. no lpg?

amature radio callsign MM6MIS

LBART

Posts: 348
Name: lee bartlett

Re: rivnut tool.

« Reply #1 on: January 07, 2011, 09:00:14 AM »

Hi john a can help you out there if you fancy a trip to airdrie???

Cheers Lee

Logged

TeamBart
Cross Country Motorsport

python

Posts: 2679
its not a landrover if it doesn't leak oil.

Re: rivnut tool.

« Reply #2 on: January 07, 2011, 09:08:19 AM »

Thanks mate. I might be planning a trip to Paisley soon so if I can't get one closer I'll def take your kind offer up. Thanks again.

Logged

my name, JON
disco 200 tdi,
disco 300 tdi
110 v8
3 x freelanders td4
1965 series 2a 109 crewcab.
series 3 on galvy chassis
disco 200 tdi,
disco 3.9 v8 lpg
disco 3,9. no lpg?

amature radio callsign MM6MIS

Lwtman

Posts: 54

Re: rivnut tool.

« Reply #3 on: January 07, 2011, 05:29:30 PM »

I have a tool but am no closer than Lee! 10 miles south of Edinburgh approx.

I have used a bolt a washer and a nut successfully before to fit rivet nuts.

Regards

Peter

Logged

python

Posts: 2679
its not a landrover if it doesn't leak oil.

Re: rivnut tool.

« Reply #4 on: January 07, 2011, 05:35:20 PM »

I don't have the rivnuts yet either mate. I'm looking at some on eBay. I'm thinking I might be cheaper buying one than driving to borrow. I'm away east of Dundee and barely get 20 mpg. Thanks for your kind offer. I'm maybe going to ikea tomorrow but it's a bit late to find rivnuts. If there was more
time for me to source the bits I would have tried to get along. Thanks though. Jon

Logged

my name, JON
disco 200 tdi,
disco 300 tdi
110 v8
3 x freelanders td4
1965 series 2a 109 crewcab.
series 3 on galvy chassis
disco 200 tdi,
disco 3.9 v8 lpg
disco 3,9. no lpg?

amature radio callsign MM6MIS

Navigator

Posts: 265
Discovery 4 Causeway
Name: Stuart Clink

Re: rivnut tool.

« Reply #5 on: January 07, 2011, 06:01:39 PM »

Jon,

I have tool and nuts. A small diversion along the motorway network if going to Paisley?

Logged

Navigator GM1VBE

python

Posts: 2679
its not a landrover if it doesn't leak oil.

Re: rivnut tool.

« Reply #6 on: January 07, 2011, 06:05:50 PM »

Hi mate. Thanks. Not too sure when I'm going that way but will definatly let you know when I'm going. Thanks for the kind offers guys. I'm sure I'll get along to get this wee job done soon. Cheers. Jon

Logged

my name, JON
disco 200 tdi,
disco 300 tdi
110 v8
3 x freelanders td4
1965 series 2a 109 crewcab.
series 3 on galvy chassis
disco 200 tdi,
disco 3.9 v8 lpg
disco 3,9. no lpg?

amature radio callsign MM6MIS

Corbie

Posts: 13

Re: rivnut tool.

« Reply #7 on: January 08, 2011, 10:38:35 AM »

Probably not much help to you either- I've got one here, about 1/2 an hour north of Aberdeen.

Logged

Paul

2005 Defender 90 TD5 SW XS (mine)
2003 Nissan Terrano II 3.0TD SVE (mine)
2003 Defender 90 TD5 Hard-top (work)
2007 Defender 110 TD5 Double-cab pickup (work)

python

Posts: 2679
its not a landrover if it doesn't leak oil.

Re: rivnut tool.

« Reply #8 on: January 08, 2011, 06:18:16 PM »

Thanks for all the offers guys. Unfortunatly I didn't get a chance to pop into Edinburgh when I was at ikea. Maybe next time? Corby. Aberdeen is probably the closest of everyone. Never really
up your way though. Thanks for the offer though.

Logged

my name, JON
disco 200 tdi,
disco 300 tdi
110 v8
3 x freelanders td4
1965 series 2a 109 crewcab.
series 3 on galvy chassis
disco 200 tdi,
disco 3.9 v8 lpg
disco 3,9. no lpg?

amature radio callsign MM6MIS