SLROC Forum

as above almost finished conversion but need extended oil cooler hoses.
Has anyone had these made up before?

Thanks Bill

An agricutural plant servicier / supplier makes hydraulic hoses. Surly these are the same idea, just higer pressure 

pirtek will do them     or if you have the ends buy hose (proper hose) and jubile clips two of at each coupling will do

Bill,

There's a hydraulic repair place in Shiresmill. Thats the wee place on the road between the A985 & A907 just past Bogside from your direction.
Do you have the old hoses. This will help identify the end fittings.
If you struggle to get them, let me know. We use Hydrasun at Broxburn for the odd flexi hose.

cheers

Geoff

hi bill i had my hoses made by pirteck at  few years ago they simpley cut hose clamps off new hoses i supplied then and the clamped on there new hose, way better hose that they use if i remember they are a funny end to get a hold off they wernt happy to re end a pipe so had to sign disclamier form but they have been on for 3 years and are just as good as new

George Collier just by Kinross will make them, though as above do do mine I cut and shut the metal pipe using rubber pipe jubilee clipped on between the two parts.

with the disclaimer it is unlikley you are going to get 2500lbs of pressure in an oil cooler
deamon tweeks also sell high pressure hose not steel reinforced and easy to work with

Hi bill give my mate chris from scotia bearings and hydraulics a ring he will sort you out or bring them up and I'll get them done for you chris is on 07849023302