Can someone measure there 90 CSW rear side windows for me please.

· 12 · 2212

0 Members and 1 Guest are viewing this topic.

*

rodspink

  • ****
  • Posts: 175
Hi folks.

Could some one please tell me if the side windows are exactly in the middle of the panel before I go take the can opener to my van sides. If they are not a meaurement from the edge of the back panel to the start of the window frame would be most helpfull.

Regards

Rod

*

ruaritreble

  • *****
  • Posts: 614
    • ruariboy
Re: Can someone measure there 90 CSW rear side windows for me please.
« Reply #1 on: October 13, 2010, 03:56:09 PM »
From rear corner to window 6 inch  - It's 5 3/4 to edge of rubber & 6 1/4 to inside edge of rubber.
Taken from a 90 CSW

RT
Karis 110 - The perfect way to get a MTB to the top of the hill.
Power to the pedal!

Myrtle Air Portable - V8
------------------------
MM6IIO
------------------------
http://www.youtube.com/user/ruariboy

http://s826.photobucket.com/home/ruariboy

*

rodspink

  • ****
  • Posts: 175
Re: Can someone measure there 90 CSW rear side windows for me please.
« Reply #2 on: October 13, 2010, 05:47:11 PM »
Thank you very much.

Regards

Rod

*

geoffg

Re: Can someone measure there 90 CSW rear side windows for me please.
« Reply #3 on: October 13, 2010, 05:55:12 PM »
Rod,
I have the template that I used to cut out the holes for the windows that I fitted to my 110. You're welcome to it if you want it.
Geoff :)

*

rodspink

  • ****
  • Posts: 175
Re: Can someone measure there 90 CSW rear side windows for me please.
« Reply #4 on: October 13, 2010, 09:30:32 PM »
Hi Geoff.

Yes that would be really helpfull.

Where are you located.

Cheers

Rod

*

piper5

  • *******
  • Posts: 874
Re: Can someone measure there 90 CSW rear side windows for me please.
« Reply #5 on: October 14, 2010, 04:56:56 PM »
i fitted a set to a 90 a few months ago watch for the rib in the side panel near the seatbelt mount

*

kevb

  • ***
  • Posts: 100
Re: Can someone measure there 90 CSW rear side windows for me please.
« Reply #6 on: October 14, 2010, 09:51:02 PM »
found this on t'internet a while ago.

*

rodspink

  • ****
  • Posts: 175
Re: Can someone measure there 90 CSW rear side windows for me please.
« Reply #7 on: October 15, 2010, 06:47:07 AM »
Nice one that certainly helps.
Off to the printer now.

Cheers for the help peeps.

Rod

*

geoffg

Re: Can someone measure there 90 CSW rear side windows for me please.
« Reply #8 on: October 15, 2010, 07:04:01 AM »
Hi Geoff.

Yes that would be really helpfull.

Where are you located.

Cheers

Rod

I'm in Comrie, just West of Dunfermline on the A907.
Geoff

*

piper5

  • *******
  • Posts: 874
Re: Can someone measure there 90 CSW rear side windows for me please.
« Reply #9 on: October 15, 2010, 07:32:42 AM »
BEWARE  the above picture may give dimensions to the window frame not the hole you are going to cut which will ne a bout 20mm smaller
also check where you take your measurements from i used a set of rivets as a guide once and found they were different on each side by about 10mm, resulting in a bigger hole in one side :o

*

rodspink

  • ****
  • Posts: 175
Re: Can someone measure there 90 CSW rear side windows for me please.
« Reply #10 on: October 17, 2010, 07:00:27 PM »
Job done thanks for everyones help.
Goeff thanks for the offer of the templates, Weather was great today so just went for it, out with the old tape measure.

I tried to upload a picture but the site wont let me for some reason, same with my Avatar.

Regards
Rod

*

coolcamper55

  • *******
  • Posts: 959
Re: Can someone measure there 90 CSW rear side windows for me please.
« Reply #11 on: October 18, 2010, 08:20:38 PM »
Stick your pictures and the avatar in a file on Photobucket then link to them when editing /setting your profile, should work a treat then

T